Trane XL824 - Adding Z-Wave Devices via Mobile App; Initiating Device Addition on App; Z-Wave Device Inclusion Process

032-5090-06C-EN page 27
Alternatively, your XL824 allows you to add Z-Wave
devices using the Trane Home app on your mobile
device.
Adding Z-Wave Devices
1. Start the mobile app.
2. Select the menu button in the top left corner.
3. At the bottom of this slide out menu, select
Connect New Device.
4. Select Z-Wave Device.
5. When prompted, prepare the device to be
added to the Z-Wave network by following
the device manufacturer’s instructions to
put device into add mode. You will have four
minutes to complete this process.
Adding Z-Wave Devices (via mobile app)