Trane XL824 - Z-Wave Device Management; Adding New Z-Wave Devices; Removing Existing Z-Wave Devices; Advanced Z-Wave Settings Access

page 26 824 User Guide
Adding/Removing Z-Wave Devices
To Add or Remove Z-Wave Devices select : Home
Screen > Menu > Smart Home
Your XL824 is designed to integrate seamlessly with
your Trane Home account.
Adding Z-Wave Devices
1. From the HOME Screen, select MENU, then
select SMART HOME.
2. Select ADD DEVICE and follow the device
manufacturer’s instructions for setting the
Z-Wave device into learn mode. You will have
four minutes to set the device into learn mode
after select ing the ADD DEVICE button.
Removing Z-Wave Devices
1. From the HOME Screen, select MENU, then
select SMART HOME.
2. Select REMOVE DEVICE and follow the
manufacturer’s instructions for setting the
Z-Wave device into learn mode. You will have
four minutes to set the device into learn mode
after select ing the REMOVE DEVICE button.
Advanced Z-Wave Settings
Select ADVANCED for advanced Z-Wave functions
including unregistering your bridge from Trane
Home or factory resetting your bridge. See the
Advanced Z-Wave Settings section for more
information.
Update Network
Select UPDATE NETWORK to update the network
of your bridge. Updating the network can generate
a lot of Z-Wave trac over the network and can take
up to 15 minutes to complete.