Trane XL824 - Configuring 1-Touch Presets; 1-Touch Preset Functionality; Setting Away Preset Temperatures; Setting Home & Sleep Presets

page 18 824 User Guide
1-Touch Presets provide predetermined Heating
and Cooling Set Points for Home, Away and Sleep
time periods.
NOTE: 1-Touch Presets require Scheduling to be
disabled. To disable Scheduling, go to HOME
> MENU > SCHEDULES & PRESETS > USE
SCHEDULES OFF.
When scheduling is disabled, heating and
cooling set points are maintained indenitely.
When a temperature change is desired, the user
must manually adjust the XL824 Control to the
new setting.
Conguring 1-Touch Presets
1. To change the Cooling Set Point, select the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
2. To change the Heating Set Point, select the
red HEATING SET POINT area to activate
the setting. The current System Mode
indicator will display red wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
Conguring 1-Touch Presets
82º
62º
Away
Away
Away Preset
Temperatures
$
Home
Sleep
Increase active
set point
Decrease active
set point
Cooling Set Point
(select to change)
Adjust
presets
Heating Set Point
(select to change)
Current
mode
Navigate to Conguring 1-Touch Presets by selecting:
Home Screen > Menu > Schedules & Presets > 1-Touch Presets
3. Repeat the process for Home and Sleep
settings.
4. Select APPLY, then HOME to return to the
Home Screen.
NOTE: When Scheduling is enabled, only the
Away preset is available and can be used for
energy savings.