Trane XL824 - Managing 1-Touch Presets; Editing Preset Temperature Targets; Applying Preset Configuration Changes

032-5090-06C-EN page 19
Conguring 1-Touch Presets
1-Touch Presets provide predetermined Heating
and Cooling Set Points for Home, Away and Sleep
time periods.
NOTE: 1-Touch Presets require Scheduling to be
disabled. To disable Scheduling, go to HOME >
MENU > SCHEDULES & PRESETS > Toggle USE
SCHEDULES to OFF, or if scheduling is disabled
touch icon on home screen.
When scheduling is disabled, heating and cooling
set points are maintained indenitely. When a
temperature change is desired, the user must
manually adjust the XL824 Control to the new
setting.
Conguring 1-Touch Presets
1. To change the Cooling Set Point, select the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
2. To change the Heating Set Point, select the
red HEATING SET POINT area to activate the
setting. The current System Mode indicator
will display red wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
3. Repeat the process for Home and Sleep
settings.
4. Select APPLY, then HOME to return to the
Home Screen.
NOTE: When Scheduling is enabled, only the Away
preset is available and can be used for energy
savings.