Transducer Techniques SSI User Manual

- 22 -
7. Data Recall
Data Logging Software (P/N SSI-DLS) is available from www.transducertechniques.com
for download. This software is needed to recall stored data from the meter. It lists, plots
or stores meter data in PC memory.
Recall initiated by the Log key or a control input while in the RECALL mode. The
meter sends the Memory # and stored Value to the display. The meter sends the USB
data item selections via USB, except that the Value stored in Memory is substituted for
the USB Value selection.
Recall by computer command with the meter in either the RUN or RECALL mode.
The computer command sends the starting Memory # and number of memory locations
to be read. Meter displays “dnLoAd” and responds with the USB data items selections via
USB, except that the Value stored in Memory is substituted for the USB Value selection.
The meter resets when the recall is done.

Transducer Techniques SSI Specifications

General

Brand	Transducer Techniques
Model	SSI
Category	Measuring Instruments
Language	English