Transducer Techniques SSI User Manual

SSI
SMART SENSOR INDICATOR
PLUG & PLAY IEEE 1451.4 COMPLIANT
OPERATOR MANUAL (USB)
R

Transducer Techniques SSI Specifications

General

Excitation	10 VDC
Zero Balance	±1% Full Scale
Insulation Resistance	5000 Megohms @ 50 VDC
Safe Overload	150% Full Scale
Material	Stainless Steel
Weight	Varies with model

Summary

TEDS IEEE 1451.4 Introduction

SSI Product Introduction

Safety Considerations and Meter Care

Safety Precautions

Important warnings for safe operation, handling, and electrical safety.

Connector Wiring Information

Keypad Operation

TEDS Error Messages

Lists and explains error messages for TEDS connection issues.

Data Logging and Recall Operation

Modes of Operation

Logging and Recall Key Actions

Explains LOG and RECALL key functions based on mode and push duration.

Recall Mode

Erasing Memory

Data Logging Details

Data Recall Procedures

Recall Initiation Methods

Menu Mode Programming Fundamentals

Conversion Rate Settings

Meter Scaling Methods

Coordinates of 2 Points Scaling

Reading Coordinates of 2 Points Scaling

Method for non-TEDS scaling using actual signals and desired readings.

Noise Filtering Options

Peak, Valley, and Fast Peak Capture

Alarm Configuration and Operation

Alarm Hysteresis Settings

Alarm Band Deviation Settings

Calibration Due Indicators

Menu Mode Programming Keystrokes

Serial Configuration 1 (SER_1)

Data Logging Configuration (LOG)

Alert and Warning Settings (ALERT)

Instrument Setup and Data Display via PC

ESTABLISHING COMMUNICATIONS

Steps to connect SSI meter to PC and establish communication.

Setup and File Sharing via PC

Real-Time Data Display via PC

Custom Curve Linearization

Custom Curve: Text File Entry Mode

Custom Curve: 2-Coordinate Keyboard Entry

Custom Curve: 2-Coordinate File Entry

Custom Curve: Equation Entry Mode

Meter Calibration Process

Technical Specifications