Transport and installation
Final installation on-site
44
Operating instructions: Belt conveyor TS 1200
Version 5.7ENG, 14.05.2018
Final installation on-site
We recommend having the installation carried out by TRANSNORM
SYSTEM GmbH. Alternatively, final installation may be carried out under the
supervision of or following instruction by TRANSNORM SYSTEM GmbH.
In any case, the assembly must be carried out by specialised staff author-
ised by the user/operating company.
Please be informed that some work steps of the following installation instruc-
tions may not apply to your individual conveyor due to variations in design
and equipment.
Assembly
Curve belt conveyors are almost always delivered in one piece. Curve belt
conveyors delivered in several parts require installation by TRANSNORM
SYSTEM GmbH. Do not install these machines yourself.
To Next Page
