Maintenance and care
Lubricants
56
Operating instructions: Belt conveyor TS 1200
Version 5.7ENG, 14.05.2018
Lubricants
Maintenance schedule
The activities described in the maintenance schedule are based on one-shift
operation.
Please refer to the section on "Maintenance and repair" for instructions on
the relevant maintenance work provided that it may be carried out by tech-
nical personnel as indicated. Please ensure full compliance with the safety
instructions in each section.
Lubricants
Type of lubricant Description
Gear oil See motor manufacturer's operating instructions (enclosed)
Lubricating grease ARAL HLP 2, BP Energrease LS-EP 2, ESSO Beacon EP 2,
KLÜBER Staburags NBU 12, KLÜBER Centoplex EP 2,
MOBIL Mobilux EP 2, SHELL Alvania R2
Chain oil OKS 340, OKS 341, BECHEM Berumoly P 73,
BECHEM Berumoly P 80
Event-related maintenance schedule (e.g.: damaged loads)
Interval Assembly group Checks/measures
Immedi-
ately
Complete machine Visual inspection:
Accumulation of load residue? If so, remove
residue from the machine.
Foreign particles/foreign objects left on the
conveyor belt or in the pulley/roller areas? If
so, remove the particles/objects from the
machine.
To Next Page
Loading...
