Do you have a question about the Traulsen INTELA-TRAUL and is the answer not in the manual?
Brand | Traulsen |
---|---|
Model | INTELA-TRAUL |
Category | Control Unit |
Language | English |
Explains how to use the service manual effectively.
Provides overview of INTELA-TRAUL microprocessor controls.
Details on how to operate the controller interface.
Step-by-step guide to adjust unit temperature settings.
Procedure to initiate a manual defrost for R&A models.
Procedure to initiate a manual defrost for G-Series models.
Steps to diagnose issues with various controller sensors.
Procedures to test and identify failed internal or external relays.
Guide for testing components like door switches and transformers.
Troubleshooting flowchart for evaporator coil icing issues.
Instructions on correct placement of various unit sensors.
Overview of the controller for R&A vertical units.
Details on parts assembly for R&A vertical controllers.
Overview of the controller for UC & UL horizontal units.
Details on parts assembly for UC & UL horizontal controllers.
Overview of the controller for G-Series vertical units.
Overview of the controller for R-Series heated cabinets.
Details on H1 version parts assembly for R-Series heated cabinets.
Details on MIT version parts assembly for R-Series heated cabinets.
Steps for removing and installing vertical controllers.
Steps for removing and installing horizontal controllers.
Guide on interpreting and using troubleshooting flowcharts.
Troubleshooting steps for high temperature alarms.
Troubleshooting steps for low temperature alarms.
Troubleshooting steps for door open alarms.
Troubleshooting steps for power loss alarms.
Troubleshooting steps for system leak alarms.
Troubleshooting steps for condenser clean alarms.
Procedure to enter the controller's engineering access level.
Explains various control parameters and their functions.
Details on accessing parameters and their measurement units.
Specific parameter settings for G-Series MIT II controllers.
Specific parameter settings for R-Series MIT II controllers.
Additional R-Series parameter settings for MIT II controllers.
Specific parameter settings for Undercounter MIT II controllers.