EasyManua.ls Logo

Traxxas SLEDGE User Manual

Traxxas SLEDGE
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL 95076-4
OWNER’S MANUAL
Question and Answer IconNeed help?

Do you have a question about the Traxxas SLEDGE and is the answer not in the manual?

Traxxas SLEDGE Specifications

General IconGeneral
Scale1/8
Drive4WD
Battery TrayAdjustable
Wheel Diameter3.8 inches (97mm)
Skill Level4
TransmissionSingle-Speed
Speed ControlVXL-6s Waterproof Electronic Speed Control
Chassis3.2 mm Aluminum
DifferentialsSealed, hardened steel bevel
Differential TypeHardened Steel Bevel Gear
Chassis Structure/Material3.2 mm Aluminum
Radio SystemTraxxas TQi 2.4GHz Transmitter with TSM
SuspensionIndependent
TiresSledgehammer
Steering Servo2075 waterproof metal-gear
Servo2075 waterproof metal-gear

Summary

INTRODUCTION

Traxxas Support

Information on how to contact Traxxas for support and available options.

Quick Start

Overview of procedures to get the model running quickly. Turn to page 8.

REGISTER YOUR MODEL

Instructions to register the product online for better customer service.

BEFORE YOU PROCEED

SUPPORT

Contact information and resources for technical support and service.

Warnings, Helpful Hints, & Cross-References

Explanation of icons used throughout the manual for warnings and tips.

SAFETY PRECAUTIONS

Important Points to Remember

Key safety points for operating the model, including public roads and crowds.

Speed Control

Precautions for the electronic speed control (ESC) to prevent damage and ensure safety.

FIRE HAZARD

Critical warnings regarding LiPo battery hazards, fire, and explosion risks.

TOOLS, SUPPLIES AND REQUIRED EQUIPMENT

Supplied Tools and Equipment

List of specialty metric tools included with the model.

Recommended Equipment

List of useful items for an RC toolbox, not required for operation.

REMOVING AND INSTALLING THE BODY

Step-by-step instructions for removing and reinstalling the model's body.

QUICK START: GETTING UP TO SPEED

TRAXXAS TQI RADIO SYSTEM

INTRODUCTION

Overview of the TQi 2.4GHz transmitter and its features.

RADIO AND POWER SYSTEM TERMINOLOGY

Definitions of terms used in the manual related to radio and power systems.

Applying the Decals

Instructions on how to apply decals to the model for a custom look.

IMPORTANT RADIO SYSTEM PRECAUTIONS

Crucial precautions for antenna wire to maintain radio range and prevent damage.

TRANSMITTER AND RECEIVER

Diagram and labels for the transmitter and receiver components.

MODEL WIRING DIAGRAM

Visual guide showing how the electronic components are connected.

INSTALLING TRANSMITTER BATTERIES

Step-by-step guide for installing AA batteries into the transmitter.

Use the Right Batteries

Advice on using correct batteries for the transmitter and warnings about low battery.

SELECTING BATTERIES FOR YOUR MODEL

Guidance on choosing appropriate LiPo batteries and chargers for the model.

INSTALLING BATTERY PACKS

Instructions for securely installing LiPo battery packs into the model's compartment.

Battery iD

Explanation of Traxxas Battery iD feature for automatic charger settings.

The Traxxas High-Current Connector

Information on the connector's design for optimal power delivery.

RADIO SYSTEM RULES

Essential rules for operating the transmitter and model safely.

RADIO SYSTEM CONTROLS

Identification of controls on the transmitter and their basic functions.

RADIO SYSTEM BASIC ADJUSTMENTS

Guidance on adjusting steering trim and the multi-function knob.

USING THE RADIO SYSTEM

Steps for checking and operating the radio system before driving.

Range-Testing the Radio System

Procedure to ensure proper radio system operation at a distance.

Higher Speeds Require Greater Distance

Advice on maintaining radio range at higher speeds.

TQi Binding Instructions

Steps for binding the transmitter and receiver if needed.

Automatic Failsafe

Explanation of the radio system's built-in failsafe function.

TRAXXAS STABILITY MANAGEMENT (TSM)

Explanation of how TSM assists in maintaining vehicle control.

SETTING UP THE ANTENNA

Instructions for properly installing and positioning the receiver antenna.

ADJUSTING THE ELECTRONIC SPEED CONTROL

Electronic Speed Control Adjustments

Overview of ESC settings and customization options.

ATTENTION: USING LiPo BATTERIES

Warnings and guidelines for using LiPo batteries with the ESC.

Verify Low-Voltage Detection setting

Steps to check if Low-Voltage Detection is activated on the ESC.

To activate Low-Voltage Detection (LiPo setting)

Procedure to activate Low-Voltage Detection for LiPo battery use.

Selecting a Throttle Mode: SPORT, RACE, or TRAINING

How to select between Sport, Race, and Training modes for the ESC.

VXL-6s Setup Programming

Steps to calibrate the ESC to the transmitter.

VXL-6s Profile Selection

How to select different ESC profiles (Sport, Race, Training).

VXL-6s Specifications

Technical specifications for the VXL-6s electronic speed control.

Selecting Sport Mode

Details on setting up the ESC for Sport Mode (Profile #1).

Accessory Power Panel

Information about the ESC's power panel for optional accessories.

LED Codes and Protection Modes

Explanations of ESC LED indicators and protection modes.

LED Codes and Protection Modes

Detailed explanation of ESC LED indicators and protection modes.

DRIVING YOUR MODEL

Tips for Increasing Run Time

Strategies to maximize the duration of battery power.

mAh Ratings and Power Output

How battery capacity affects performance and speed.

RUNNING IN WET CONDITIONS

Guidelines and precautions for operating the model in wet environments.

Motor Precautions

Specific advice for operating the motor in wet or muddy conditions.

Before Running Your Vehicle in Wet Conditions

Preparations needed before operating the model in wet conditions.

After Running Your Vehicle in Wet Conditions

Procedures for cleaning and maintaining the model after wet use.

MAINTAINING A WATERTIGHT SEAL

Steps for removing and installing radio gear while maintaining the receiver box seal.

BASIC TUNING ADJUSTMENTS

SUSPENSION TUNING

Adjusting shock mounting positions for different driving conditions.

Fine Tuning the Shocks

Detailed instructions on disassembling and tuning the GT-Maxx c shocks.

WHEELS AND TIRES

Information on selecting and experimenting with aftermarket wheels and tires.

MOTORS AND GEARING

How to change gearing for speed, acceleration, and temperature control.

Adjusting Gear Mesh

Instructions for setting the gear mesh to prevent stripped spur gears.

TEMPERATURES AND COOLING

Options for monitoring and cooling components to extend their life.

TUNING THE SEALED GEAR DIFFERENTIALS

How to tune differential performance by changing silicone oil viscosity.

CENTERING YOUR SERVO

Procedure to re-center the steering servo before installing the servo horn.

MAINTAINING YOUR MODEL

Inspect the vehicle for obvious damage or wear

Checklist of potential damage and wear points to inspect on the vehicle.

Other periodic maintenance

Regular maintenance tasks for chassis, shocks, suspension, driveline, and bearings.

Storage

Guidelines for storing the model, including battery removal.

TQI ADVANCED TUNING GUIDE

Steering Sensitivity (Exponential)

How to adjust steering sensitivity using the Multi-Function knob.

Throttle Sensitivity (Throttle Exponential)

How to adjust throttle sensitivity using the Multi-Function knob.

Steering Percentage (Dual-Rate)

How to set the percentage of servo travel for steering.

Braking Percentage

How to set the percentage of brake travel for electric models.

Throttle Trim

How to use the Multi-Function knob as a throttle trim.

Failsafe

Explanation of the radio system's built-in failsafe function.

Steering and Throttle End Points

How to set servo travel limits for steering and throttle.

Steering and Throttle Sub-Trim

How to fine-tune servo neutral position using sub-trim.

Setting Lock

How to disable the Multi-Function knob to prevent accidental changes.

Multiple Settings and the Multi-Function Knob

How settings from the Multi-Function knob overlay each other.

TRANSMITTER LED CODES

Table of transmitter LED patterns and their meanings.

RECEIVER LED CODES

Table of receiver LED patterns and their meanings.

TRAXXAS LINK MODEL MEMORY

Overview of the feature for storing and recalling model settings.

Model Lock

How to activate Model Lock to prevent deletion of model memory.

To activate Model Lock

Step-by-step guide to activate Model Lock.

To delete a model

Steps to delete a model from the transmitter's memory.

MENU TREE

Diagram showing how to navigate the transmitter's menu system.

MENU TREE FORMULAS

A quick reference guide for accessing various transmitter functions.

PROGRAMMING YOUR TQI TRANSMITTER WITH MOBILE DEVICE

How to use the Traxxas Link app for advanced tuning.

Traxxas Link

Overview of the Traxxas Link app for model control and telemetry.

Real-Time Telemetry

How to view and log real-time data using the Traxxas Link app.

Manage up to 30 Models with Traxxas Link

How Traxxas Link simplifies organizing multiple models.

Related product manuals