TREMOL M23 - PROGRAMMING MODES; System Parameters Configuration (Mode 0); General Settings and Password Management (Mode 1); Payment Type Configuration (Mode 2)

User manual TREMOL M23
11
PROGRAMMING
DEFINITION OF PROGRAMMING. BASIC PRINCIPLES
 The programming of ECR is the process of setting-up the cash register by
defining the parameter values corresponding to its point of sale and user requirements.
The programming is performed in “PROGRAM” operation mode.
Example: enter PROGRAM MODE
Key sequence
ECR display readings
/ / / r s
SALES ______
REPORT Z _____
REPORT X _____
PROGRAM _____
Programming mode selection
33333
Program 0-9 .
0 Parameters
1 Settings
2 Paymens
3 VAT groups
The display reading shows that ECR is in programming mode and awaits sub-mode
selection.
Programming modes
 The ECR is programmed in sub-modes, which are selected from scrolling menu
using r s or by pressing the corresponding key:
Key
Name
Function
0
0 Parameters
Programming the system parameters of ECR
1
1 Settings
Programming the general parameters of ECR
and changing the access passwords
2
2 Payments
Programming the types of payment
3
3 VAT groups
Programming VAT rates values
4
4 Departaments
Programming the department parameters
5
5 Articles
Programming the article parameters
6
6 Operators
Programming the operator’s parameters
7
7 PC
Programming and reporting communication
mode
8
8 TESTS
ECR tests