TREMOL M23 - PAYMENT AND EXCHANGE RATE PROGRAMMING; Payment Type Configuration and Exchange Rates; VAT RATES PROGRAMMING

User manual TREMOL M23
16
PROGRAMMING NAME OF PAYMENT AND EXCHANGE RATE [2]
 ECR may operate with five different types of payment with following
characteristics:
- main CASH 0 – key = (prints always CASH), at the display is shown the
programmed name (default — national currency);
- additional 1, 2 and 3 with programmable name and option to disable it;
- currency with programmable name and exchange rate to main payment and
enabled only when system parameter CURRENCY = YES).
Function keys:
Key
Name
Function / Value
Range value default
+
Payment 0, 1,2,3,4
Scrolls to lesser payment/greater
number
To payment number 3 and
then currency
-
Payment 4,3,2,1,0
Scrolls to greater/lesser payment
number
To payment 0
0
0 Name
Enter payment name programming
mode
10 characters max
0 – Cash 1 – Card
2 – Chegue 3 – Coupon
USD
1
1 Enabled
Enable / disable present additional
payment
N disabled
or Y enabled
1
1 Rate
Set rate when currency is selected
Digit from 0.000 to
999.99999
Default 79.75118
2
2 Change
Set change parameter of additional
payments. Several options available
with pressing the key =
0- with change calculation;
1- no change;
2- limited = due amount
3
3 Select PY
|
Help
Prints programmed parameters of the payment types
VAT RATES PROGRAMMING [3]
 ECR operates with five VAT Rates (A, B, C, D and E) with programmable rate
values. When registering sale, the turnover is accumulated to one of the VAT Rate
registers according to article or department VAT Rate Group attachment.