TREND IQ4E User Manual

IQ4E/.. Installation Instructions - Mounting TG201338 Issue 4, 19-Jan-2016. Applies to v3.33. 1
Installation Instructions - Mounting
IQ4E/..
Controller
Important: Retain these instructions
These instructions shall be used by trained service
personnel only.
If the equipment is used in a manner not
specied by these instructions, the protection provided by the
equipment may be impaired.
https://partners.trendcontrols.com
GB DE DK FIES FR
IT NL NO RU
PL SE
1
Dimensions
WARNING Removal of cover exposes dangerous
voltages.
WARNING To reduce the risk of electrical shock or re
do not interconnect the output of different Class 2 circuits
.
It is recommended that the installation should comply
with the local electrical safety installation practices (e.g.
HSE Memorandum of Guidance on Electricity at Work
Regulations 1989, USA National Electric Code).
Any connected devices must be insulated from mains by
reinforced insulation.
3 INSTALLATION
1 BOX CONTENTS 2 STORING
CONTENTS
1 Box Contents .................................................................1
2 Storing ...........................................................................1
3 Installation .....................................................................1
Note: For temperatures below 0°C (32°F) special care must be
taken that there is no condensation on or within the unit.
IQ4E/.. Installation
Instructions - Mounting
(TG201338)
IQ4/IC/TERM
I/O Bus Terminator
4 Removing From DIN Rail ............................................11
5 Field Maintenance .......................................................12
6 Disposal .......................................................................12
7 End User Licence Agreement .....................................12
Labels used on IQ4E
!
Caution, consult
documentation
Caution, possibility
of electric shock
230 Vac input
power connector
RS232 Local
Supervisor Port
Wallbus
connector
Auxiliary supply
output connector
nn
n
Universal input
connector
USB (for future use) Terminator switch
(/XNC only)
Bias switch
(/XNC only)
RS-485
(/XNC only)
Ethernet indicators
and connector
84
85
86 87
Trend current
loop connector
Auxiliary supply
output connector
n
nn
Analogue output
connector
USB Local
Engineering Port
Service button/
indicator
Power indicator Watchdog indicator
LAN OK indicator I/O Bus indicator
192.5 mm (7.55”) 58.5 mm (2.3”)
53.5 mm (2.11”)
110 mm (4.33”)
116 mm (4.57”)
HO
2
+60°C
(+140°F)
0
-25°C
(-13°F)
90%RH

TREND IQ4E Specifications

General

Brand	TREND
Model	IQ4E
Category	Controller
Language	English