Need help?Do you have a question about the TRENDnet AC1750 and is the answer not in the manual?
Lists items included in the router package.
Details the capabilities and specifications of the wireless router.
Identifies the physical ports and buttons on the rear of the router.
Details power connection, reset function, and front panel LED indicators.
Illustrates the router's network connection setup.
Explains network basics and components needed for a home network setup.
Outlines prerequisites for setting up a home network with Internet access.
Provides preliminary steps and notes before installing the router, including ISP details.
Details DHCP, Fixed IP, and PPPoE connection setup methods.
Instructions for setting up PPTP, L2TP, and PPPOE connections.
Guides to open a browser and navigate to the router's IP address.
Details login procedures and accessing the setup wizard.
Initiates the wizard to configure the router's Internet connection.
Guides to select the appropriate Internet connection type.
Starts the wizard to configure wireless network security settings.
Explains options for securing the wireless network with different security levels.
Guides setting SSID and security password for the wireless network.
Discusses different wireless security types and their suitability.
Explains WEP, WPA, and WPA-Auto security standards and their characteristics.
Details the steps and options for configuring WEP security.
Explains how to configure WPA/WPA2-PSK security options for enhanced wireless protection.
Shows the formats for WEP keys (HEX and ASCII) and their lengths.
Describes using a PIN for WPS connection with wireless devices.
Details the PBC method for WPS connection using physical buttons.
Explains how to use the virtual WPS button in the router management page.
Explains the Multiple SSID feature for creating additional wireless networks, including guest networks.
Describes radio control and 802.11n mode settings for the 2.4GHz band.
Details how to configure the Service Set Identifier (SSID) for the wireless network.
Explains SSID broadcasting and channel selection for optimal performance.
Explains how to select the channel bandwidth for improved wireless performance.
Covers basic configuration settings for the 5GHz wireless band.
Explains 802.11 mode and SSID settings for the 5GHz band.
Covers SSID broadcasting, channel, and bandwidth settings for the 5GHz band.
Explains how to set up a WDS bridge connection for the 2.4GHz band.
Explains how to set up a WDS bridge connection for the 5GHz band.
Explains how to set up rules to block specific ports or applications for LAN clients.
Guides on blocking specific URLs or websites for network access.
Provides instructions on how to access the router's web-based management interface.
Explains how to navigate and use the router's configuration menu.
Guides on how to change the default administrator login password for security.
Explains how to change the router's device name as it appears on the network.
Details configuration for the router's WAN connection using IPv6.
Details configuration for the router's LAN connection using IPv6.
Explains the DMZ feature for exposing a device to the Internet, with security warnings.
Explains how to set up rules for Virtual Server, including protocol, ports, and IP address.
Guides on configuring port trigger rules with protocol, ports, and schedule.
Explains how to set up gaming rules, including LAN IP address and TCP/UDP ports.
Details how to add static routes for WAN connections.
Details how to add static routes for LAN connections.
Explains how to configure Samba server settings for file sharing.
Details the configuration options for the FTP server.
Details the steps for installing the Print Share Utility on Windows.
Details the steps for installing the Print Share Utility on Mac OS X.
Describes the main window of the USB Control Center Utility, showing connected devices.
Guides on how to start the TRENDnet USB Control Center Utility.
Explains how to configure server settings within the utility window.
Guides on connecting the computer to a USB device (printer/scanner) via the utility.
Explains how to disconnect the computer from a USB device.
Guides on sending a request to connect to a USB device currently in use by another computer.
Explains how to reset the router to its original factory settings.
Shows status info for 2.4GHz wireless, including MAC, channel, SSID, and security.
Shows status info for 5GHz wireless, including MAC, channel, SSID, and security.
Lists active 2.4GHz wireless devices connected, with MAC address and association time.
Lists active 5GHz wireless devices connected, with MAC address and association time.
Details output power levels and receiving sensitivity for wireless standards.
Lists the available wireless channels for 2.4GHz and 5GHz bands.
Offers steps to resolve issues when the router management page cannot be displayed.
Guides users on how to determine their Internet account type.
Provides steps for wizard issues and internet connectivity failures.
Addresses problems related to connecting wirelessly to the router.
Provides methods to find the computer's IP address using command prompt or graphical interface.
Lists items included in the router package.
Details the capabilities and specifications of the wireless router.
Identifies the physical ports and buttons on the rear of the router.
Details power connection, reset function, and front panel LED indicators.
Illustrates the router's network connection setup.
Explains network basics and components needed for a home network setup.
Outlines prerequisites for setting up a home network with Internet access.
Provides preliminary steps and notes before installing the router, including ISP details.
Details DHCP, Fixed IP, and PPPoE connection setup methods.
Instructions for setting up PPTP, L2TP, and PPPOE connections.
Guides to open a browser and navigate to the router's IP address.
Details login procedures and accessing the setup wizard.
Initiates the wizard to configure the router's Internet connection.
Guides to select the appropriate Internet connection type.
Starts the wizard to configure wireless network security settings.
Explains options for securing the wireless network with different security levels.
Guides setting SSID and security password for the wireless network.
Discusses different wireless security types and their suitability.
Explains WEP, WPA, and WPA-Auto security standards and their characteristics.
Details the steps and options for configuring WEP security.
Explains how to configure WPA/WPA2-PSK security options for enhanced wireless protection.
Shows the formats for WEP keys (HEX and ASCII) and their lengths.
Describes using a PIN for WPS connection with wireless devices.
Details the PBC method for WPS connection using physical buttons.
Explains how to use the virtual WPS button in the router management page.
Explains the Multiple SSID feature for creating additional wireless networks, including guest networks.
Describes radio control and 802.11n mode settings for the 2.4GHz band.
Details how to configure the Service Set Identifier (SSID) for the wireless network.
Explains SSID broadcasting and channel selection for optimal performance.
Explains how to select the channel bandwidth for improved wireless performance.
Covers basic configuration settings for the 5GHz wireless band.
Explains 802.11 mode and SSID settings for the 5GHz band.
Covers SSID broadcasting, channel, and bandwidth settings for the 5GHz band.
Explains how to set up a WDS bridge connection for the 2.4GHz band.
Explains how to set up a WDS bridge connection for the 5GHz band.
Explains how to set up rules to block specific ports or applications for LAN clients.
Guides on blocking specific URLs or websites for network access.
Provides instructions on how to access the router's web-based management interface.
Explains how to navigate and use the router's configuration menu.
Guides on how to change the default administrator login password for security.
Explains how to change the router's device name as it appears on the network.
Details configuration for the router's WAN connection using IPv6.
Details configuration for the router's LAN connection using IPv6.
Explains the DMZ feature for exposing a device to the Internet, with security warnings.
Explains how to set up rules for Virtual Server, including protocol, ports, and IP address.
Guides on configuring port trigger rules with protocol, ports, and schedule.
Explains how to set up gaming rules, including LAN IP address and TCP/UDP ports.
Details how to add static routes for WAN connections.
Details how to add static routes for LAN connections.
Explains how to configure Samba server settings for file sharing.
Details the configuration options for the FTP server.
Details the steps for installing the Print Share Utility on Windows.
Details the steps for installing the Print Share Utility on Mac OS X.
Describes the main window of the USB Control Center Utility, showing connected devices.
Guides on how to start the TRENDnet USB Control Center Utility.
Explains how to configure server settings within the utility window.
Guides on connecting the computer to a USB device (printer/scanner) via the utility.
Explains how to disconnect the computer from a USB device.
Guides on sending a request to connect to a USB device currently in use by another computer.
Explains how to reset the router to its original factory settings.
Shows status info for 2.4GHz wireless, including MAC, channel, SSID, and security.
Shows status info for 5GHz wireless, including MAC, channel, SSID, and security.
Lists active 2.4GHz wireless devices connected, with MAC address and association time.
Lists active 5GHz wireless devices connected, with MAC address and association time.
Details output power levels and receiving sensitivity for wireless standards.
Lists the available wireless channels for 2.4GHz and 5GHz bands.
Offers steps to resolve issues when the router management page cannot be displayed.
Guides users on how to determine their Internet account type.
Provides steps for wizard issues and internet connectivity failures.
Addresses problems related to connecting wirelessly to the router.
Provides methods to find the computer's IP address using command prompt or graphical interface.
General| Brand | TRENDnet |
|---|---|
| Model | AC1750 |
| Category | Wireless Router |
| Language | English |
To Next Page
