TRENDnet TEW-753DAP User Manual

TEW-753DAP User’s Guide System Conguration
© Copyright 2013 TRENDnet. All rights reserved.
9
System conguraon
System Management and Default Sengs
If you have a brand new out of box TEW-753DAP or if you just reset
TEW-753DAP to factory defaults by pressing and holding reset buon
for over 10 seconds, your TEW-753DAP has following sengs:
Management IP :
192.168.10.100
Administrator name :
admin
Administrator password :
admin
Default SSID :
(printed on pre-set label)
Default SSID passphrase :
(printed on pre-set label)
Log-in System Management for the First Time
1
Power on your TEW-753DAP by connecng PoE cable to a PoE
switch or plug-in the power adapter comes with the package. The
power LED will turned on.
2
Search for available wireless connecons in your computer’s
network sengs. The default SSID of the TEW-735AP is shown on
the preset label. The default wireless security sengs are set to
WPA2 and the passphrase is printed on the preset label and device
label.
Or,
Connect a network cable from your computer to the TEW-753DAP
network port.

TRENDnet TEW-753DAP Specifications

General

Brand	TRENDnet
Model	TEW-753DAP
Category	Wireless Access Point
Language	English