TRENDnet TEW-753DAP - Client Bridge Mode Functionality; Repeater Mode Functionality

TEW-753DAP User’s Guide Installation
© Copyright 2013 TRENDnet. All rights reserved.
7
Client Bridge
When Client Bridge mode is set to 2.4GHz or 5GHz interface of TEW753DAP,
this interface funcons as a wireless client connecng to any AP dynamically
(channels and encrypons). The interface bridges the trac to the Ethernet
and the other wireless interface.
• Connects to any 802.11
wireless AP
• Connects two networks
wirelessly
WPS
Client Bridge
Repeater
When Repeater Mode is selected, the selected wireless interface funcons
as a wireless repeater and is able to repeat the wireless signal of an access
point. This feature is used to expand your exisng wireless network on places
your current access point is unable to reach. Make sure all the sengs on
selected interface of the TEW-753DAP matches the wireless access points you
want to repeat in same wireless sengs including SSID, channel and wireless
encrypon sengs.
Repeater