To Next Page

To Previous Page

TEW-753DAP User’s Guide System Conguration

2�4G Wireless

Wireless Network

General setups opons for your 2.4GHz wireless connecon. You can

setup up to eight SSIDs for dierent groups of users.

Network Mode : Choose between N only, G only, B only,

B/G mixed, or B/G/N mixed mode. The

rule of the thumb is to choose single

mode if your devices all work in the

same mode. Mixed mode increases

compability, but somemes lowers the

data speed�

Channel HT Mode : The latest 802.11 protocol can combine

channels for beer wireless performance.

You can choose xed 20MHz or 40MHz,

or automacally select 20MHz or 40MHz

channels.

Extension Channel : When you choose manual channel

selecon and 20/40MHz or 40MHz in

channel HT mode, you can choose which

neighbor channel you want to combine,

upper channel or lower channel.

Channel / Frequency : If you want to setup xed channel, choose

a channel number to switch your radio

frequency. Otherwise, check auto to

select the channel automacally which is

selected by default.

(When you choose 20/40MHZ or 40MHz

channel HT mode, the channel selecon

list is shorter. Four marginal channels are

reserved for channel expansion.)

TRENDnet TEW-753DAP User Manual

Other manuals for TRENDnet TEW-753DAP