Need help?Do you have a question about the trig TT31 and is the answer not in the manual?
Manual's purpose and coverage of TT31 transponder installation.
Details changes from previous issue and lists cross-referenced documents.
Overview of the TT31 Mode S transponder features and capabilities.
Description of the transponder's rear connectors and interface signals.
Lists applicable ETSO, TSO, and other regulatory standards.
Details the physical dimensions and weight of the unit.
Explains requirements for aircraft installation approval.
Lists the main TT31 unit and included accessories.
Details the components included in the installation kit.
Lists additional items needed for installation not in the kit.
Procedures for unpacking, inspecting, and physically mounting the transponder.
Overview of the two Molex connectors and antenna connection.
Specifics on power, lighting, suppression, altitude, and other interface signals.
Guidance on antenna siting, cable selection, and BNC connector assembly.
Setup for Mode S address, squawk, flight ID, GPS, TIS, and display settings.
Steps to verify interface, altitude, lighting, and GPS functionality.
Checks for address, altitude, squat switch, sensitivity, power, GPS, and TIS.
Explanation of front panel display, knobs, and buttons for operation.
Controls power and operating modes of the transponder.
Verifies valid position information for ADS-B transmission.
Provides alerts for aircraft altitude deviations.
Lists data parameters transmitted for ADS-B.
Explains different operational ADS-B service levels.
Details for meeting standards for separation services.
General| Brand | trig |
|---|---|
| Model | TT31 |
| Category | Marine Radio |
| Language | English |
To Next Page
