Need help?Do you have a question about the TRIGA TR-FFT and is the answer not in the manual?
Provides critical warnings for system installation and operation.
Details re-acceptance testing procedures after system modifications.
Specifies operational temperature and humidity ranges for the system.
Advises on measures to protect the unit from moisture and water ingress.
Illustrates the TR-FFT circuit board and its terminal connections.
Information on obtaining the latest software versions for system upgrades.
Instructions for providing feedback to improve manual accuracy.
Lists the key features and capabilities of the TR-FFT system.
Lists compatible accessories that can be used with the TR-FFT.
Outlines regulatory requirements applicable to the TR-FFT system.
Provides guidance on how to use and understand the installation manual.
Details environmental conditions required for proper system installation.
Advises on measures to protect the unit from moisture and water ingress.
Illustrates the TR-FFT circuit board and its terminal connections.
Details power and current requirements for the system.
Discusses guidelines to avoid noise and ensure proper wiring.
Provides guidance on routing wires within the cabinet.
Instructions for physically installing the TR-FFT cabinet.
Details how to mount the cabinet on a wall surface.
Explains how to recess mount the cabinet into a wall.
Steps to remove the cabinet door and dead front panel.
Instructions for installing the local handset.
Steps to install the TR-24Z-EXT zone expander.
General steps for installing the TR-FFT module.
Instructions for connecting the DC power source.
Details how to configure the TR-FFT using DIP switches.
Describes connecting the TR-FFT module to other components.
Instructions for installing the Fire Fighter Phone Jack.
Steps for assembling Single Telephone Stations.
Lists the SLC devices compatible with the system.
Specifies the maximum number of SLC devices supported.
Details wiring specifications for SLC devices.
Explains Class A wiring for SLC devices.
Instructions for setting addresses on TR-MINIMON modules.
Lists the devices used for audio phone circuits.
Specifies the maximum number of zones supported.
Details wiring for audio telephone circuits.
Explains Class A wiring for single phone jacks.
Explains Class B wiring for multi-phone jacks.
Explains Class A wiring for multi-phone jacks.
Describes audio wiring for telephone jacks only.
Describes the functions of the system's key switches.
Explains the meaning of various LEDs on the system.
Details status LEDs located on the dead front panel.
Describes the Zone Active LED indication.
Explains the Zone Trouble LED indication.
Details the process and function of the JumpStart feature.
Lists compatible power sources for the TR-FFT.
To Next Page
General