Problem Description Possible Solution
e-FOB Hints
Button press does not provide
correct operation
Verify power to the I/O module and RF
receiver.
Re-teach the FOB transmitter to the
receiver. Ensure that only Lock button is
pressed while in learn mode.
No operation or intermittent
operation
Mount RF receiver away from enclosed
metal areas and fully extend antennae.
Check FOB transmitter battery voltage.
Batteries need to be changed every 1-2
years depending on usage.
One particular e-FOB function
does not work
Check wire connection of affected
function at RF module, wiring harness,
and I/O module.
e-PAD Hints
No response with button press
Verify power to the I/O module.
Verify that keypad cable is connected.
(rest of system will function)
Access code is not recognized
Verify that code has not been changed.
Reassign keypad with instructions
starting on pages 11-12.
Confirm use of an access code, not the
authority code.
Key FOB works correctly,
keypad beeps, but no output
Cycle power to I/O module
Unexpected, secure operation
occurs
Verify DIP switches are set to correct
configuration setting.
16
To Next Page
