Trimax SnakeS2 User Manual

TRIMAX SNAKE S2 OPERATORS MANUAL
ENGLISH EDITION
©Trimax Mowing Systems (NZ) Ltd
www.trimaxmowers.com 35 27 March 2019
13. Before Operation.
SAFETY! Before attempting to make any adjustments or carry out
maintenance on your Snake review the hazard identification list and take
all necessary precautions.
12a Daily Checks
1. Preparing the mower for use:
a. For safety and reliability carry out the following checks before using the machine. Checking
procedures are in “Service and Maintenance” section.
2. Pre-start checklist:
a. Check all bolts and fastenings for tightness, tighten if loose.
b. Ensure all rotating parts turn freely.
c. Check for bent or broken blades. Ensure fling-tip types can swing on their mounting bolts.
Repair or replace as required.
d. Ensure the driveshafts are lubricated and can telescope freely.
e. Lubricate all components as shown in the maintenance schedule.
f. Check gearboxes for oil leaks. Check oil levels if leaks are detected. Top up if required.
g. Ensure transport locks operate correctly.

Trimax SnakeS2 Specifications

General

Brand	Trimax
Model	SnakeS2
Category	Measuring Instruments
Language	English