TRIMAX SNAKE S2 OPERATORS MANUAL
ENGLISH EDITION
©Trimax Mowing Systems (NZ) Ltd
www.trimaxmowers.com 36 27 March 2019
14. Using the Machine for the First Time.
SAFETY! Before attempting to make any adjustments or carry out
maintenance on the mower, review the hazard identification table (section 3b)
and take all necessary precautions.
1. Running in.
a. Although there are no operational restrictions on Trimax Snake mowers when used for the
first time, the following mechanical items should be checked.
2. After operating for one hour or after mowing 2 hectares (5 acres):
a. Visually check the entire machine for loose fasteners, particularly blade mounting bolts.
b. Check the roll and pitch pivots (large nuts and bolts that secure the mower decks to the
outriggers) are tight. Tighten if loose.
c. Check that the nuts that secure each mower deck at the front and rear are tight. Tighten if
loose.
d. Check all guards are in place and everything is operating as it should. Correct as required.
e. Check the transport locks are operating correctly. Correct if necessary.
f. Visually check the gearboxes for oil leaks. Check oil levels and replenish.
g. Check that blades are not jammed in the retracted position. Free jammed blades. Replace
bent blades.
3. After operating for 8 hours:
a. Repeat items 2a-h above.
b. Commence regular servicing as defined in the Service and Schedule section.
To Next Page
Loading...
Need help?
General