Need help?Do you have a question about the Trimble SPS985 and is the answer not in the manual?
Guidelines for handling the high-precision electronic instrument with care.
Information on radio modem regulations and licensing requirements.
Details on equipment compliance with emission standards for interference.
Safety precautions for operating 450 MHz radio transmitters.
Safety precautions for operating 900 MHz radio transmitters.
Safety precautions for operating 2.4 GHz radio transmitters.
Safety information regarding Bluetooth radio frequency exposure.
Safety precautions for operating GSM/GPRS radio transmitters.
Precautions for safely installing antennas to avoid interference.
Warnings and precautions for handling rechargeable lithium-ion batteries.
Cautionary advice for connecting the receiver to a vehicle battery.
Sources for additional product documentation and training materials.
Important warnings and guidelines for battery use and charging.
Precautions for connecting the receiver to external vehicle power sources.
Instructions for fully charging the rechargeable lithium-ion battery.
Details on the dual-slot battery charger and its components.
Information on compatible rechargeable battery types for the charger.
Description of the charger's dual slots and LED indicators.
Information on power sources for the battery charger.
Step-by-step instructions for removing the battery from the receiver.
Description of the front panel controls and indicator LEDs.
Details on the connectors and components located on the lower housing.
Instructions for operating the power button and its effects.
Explanation of the Satellite LED states and their meanings.
Explanation of the Radio LED states and their meanings.
Explanation of the Wi-Fi LED states and their meanings.
Explanation of the Battery LED states and their meanings.
Status of LEDs when loading firmware via the Lemo port.
Overview of the receiver's Wi-Fi capabilities and setup.
Guide to setting up the receiver as a Wi-Fi access point.
Guide to setting up the receiver as a Wi-Fi client.
Instructions for using Wi-Fi with the SCS900 software.
Steps to configure the receiver as a Wi-Fi base station without SCS900.
Steps to configure the receiver as a Wi-Fi rover without SCS900.
Procedures for resetting the receiver to its original factory settings.
Behavior of data logging when the receiver loses power.
General overview of common receiver problems and their solutions.
Solutions for issues related to the receiver not powering on.
Solutions for problems with satellite tracking.
Solutions for issues preventing data logging.
Solutions for when the receiver becomes unresponsive.
Guidelines for handling the high-precision electronic instrument with care.
Information on radio modem regulations and licensing requirements.
Details on equipment compliance with emission standards for interference.
Safety precautions for operating 450 MHz radio transmitters.
Safety precautions for operating 900 MHz radio transmitters.
Safety precautions for operating 2.4 GHz radio transmitters.
Safety information regarding Bluetooth radio frequency exposure.
Safety precautions for operating GSM/GPRS radio transmitters.
Precautions for safely installing antennas to avoid interference.
Warnings and precautions for handling rechargeable lithium-ion batteries.
Cautionary advice for connecting the receiver to a vehicle battery.
Sources for additional product documentation and training materials.
Important warnings and guidelines for battery use and charging.
Precautions for connecting the receiver to external vehicle power sources.
Instructions for fully charging the rechargeable lithium-ion battery.
Details on the dual-slot battery charger and its components.
Information on compatible rechargeable battery types for the charger.
Description of the charger's dual slots and LED indicators.
Information on power sources for the battery charger.
Step-by-step instructions for removing the battery from the receiver.
Description of the front panel controls and indicator LEDs.
Details on the connectors and components located on the lower housing.
Instructions for operating the power button and its effects.
Explanation of the Satellite LED states and their meanings.
Explanation of the Radio LED states and their meanings.
Explanation of the Wi-Fi LED states and their meanings.
Explanation of the Battery LED states and their meanings.
Status of LEDs when loading firmware via the Lemo port.
Overview of the receiver's Wi-Fi capabilities and setup.
Guide to setting up the receiver as a Wi-Fi access point.
Guide to setting up the receiver as a Wi-Fi client.
Instructions for using Wi-Fi with the SCS900 software.
Steps to configure the receiver as a Wi-Fi base station without SCS900.
Steps to configure the receiver as a Wi-Fi rover without SCS900.
Procedures for resetting the receiver to its original factory settings.
Behavior of data logging when the receiver loses power.
General overview of common receiver problems and their solutions.
Solutions for issues related to the receiver not powering on.
Solutions for problems with satellite tracking.
Solutions for issues preventing data logging.
Solutions for when the receiver becomes unresponsive.
To Next Page
General