Trimble SPS985 User Manual

Action Power button Description
factory
defaults
Delete
application
files
Hold for 30
seconds
The Radio, Wi-Fi, and Satellite LEDs turn off after 2 seconds. After 15
seconds, the Satellite LED comes on and stays on for 15 seconds, then
turns off to indicate that it is time to release the Power button.
The
battery LED then remains on for 15 seconds after releasing the Power
button.
The then restarts.
Note – The term “press” means to press the button and release it immediately. The term “hold”
means to press the button and hold it down for the given time.
Satellite LED
Receiver mode Satellite LED Amber
No satellites tracked Off
Boot up or when in Monitor mode On
Tracking fewer than 4 SVs Fast flash
Tracking more than 4 SVs Slow flash
Radio LED
Radio mode Radio
LEDAmber
Description
No receive
or
transmit
Off
Receive Radio slow
flash
See the table at the top of this topic.
This LED also flashes when using the Wi-Fi only for receiving
corrections.
Transmit Radio slow
flash
See the table at the top of this topic.
This LED also flashes when using the Wi-Fi only for transmitting
corrections
SPS985 GNSS Smart Antenna Getting Started Guide 21

Trimble SPS985 Specifications

General

Brand	Trimble
Model	SPS985
Category	Antenna
Language	English