User's Manual
750 50 0045 03 4
1. SAFETY REGULATIONS
1.1 Important Information
In order to prevent any damages due to wrong manipulation, please carefully read the
following instructions. TRIMOS will not accept any responsibility in case of damages caused
by inadequate use not in line with the present manual.
1.2 Security Symbols
The following security symbols are used in this manual:
General warning, utilisation advice
Risk of electric shock
Electrostatic protection
1.3 General Warnings
Protection against electrostatic interferences:
Static electricity can damage the electronic components of the instrument. In
order to prevent this type of damages, avoid any contact with the connector pins.
In order to prevent any changes of the instrument performance or any accident,
the instrument should never be dismantled.
If, for any reason, the electronic unit has to be opened, only authorized personnel
are allowed to do so.
Do not expose the instrument, its components and accessories to rain or any
projection of fluids. Avoid penetration of foreign substances into the connectors
and the instrument openings.
Do not cover or wrap the display unit during use. The unit must be kept well
ventilated to avoid any overheating.
In case of problems with the instrument or any of its parts (no display,
overheating, abnormal smell...), immediately switch off the instrument and
disconnect the power supply. Please contact your local TRIMOS agent.
This is a high accuracy instrument. Particular care should be taken during its entire
operational lifetime. Pay special attention to the following specific points :
- Use the instrument on a stable, smooth and clean surface plate.
- Avoid any shock to prevent the instrument from losing its characteristics.
- Use the instrument in a vibration free area.
- Avoid exposure to direct sunlight and excessive humidity.
- Avoid proximity of heating or air conditioning systems.
- Respect the advised environmental conditions.
To Next Page
Loading...
Need help?
General
