© 2023 All rights reserved.
About this Manual
Purpose
This manual provides the information required for the Selection, Wiring, Connection,
Setup, Operation and Functions of the MC403-X Motion Coordinator.
Please read and understand this manual to ensure correct usage of the product.
Terms
Terms that may be used in this manual are defined as follows.
A software control that operates a Servo or Stepper Motor.
A Servo or Stepper Drive, which is used for controlling the Motor.
A Servo Control System that includes a Motor, a Drive, a host controller (Motion
Coordinator) and peripheral devices.
Closing a solid-state relay to signal that the Drives may be Enabled.
Open the solid-state relay to signal that the Drives must be Disabled.
The PC Tool for commissioning and programming the Trio product suite.
An electronic output from the Motion Coordinator that produces one pulse per step
of the motor position, with a second output to signal the direction of motion.
+/- 10v output to give speed signal to the servo drive. Associated encoder input
provides position feedback
To Next Page
Loading...
