Tripp Lite SmartPro SMART3000RM2UP - Page 14

14
ON Battery Events
ThisfeatureallowstheusertoviewthenumberoftimestheUPShasexperiencedanONBattery
Event. To reset the counter to “0”, press and hold the button.
Basic Operation continued
Tap the buttonrepeatedlytoadvancetotheONBatteryEventsdisplay,asshownabove.
Note: The value displayed is a random value used for example reference.
AVR Events
ThisfeatureallowstheusertoviewthenumberoftimestheUPShasexperiencedanAutomatic
VoltageRegulationEvent.Toresetthecounterto“0”,pressandholdthe button.
Tap the buttonrepeatedlytoadvancetotheAVRdisplay,asshownabove.
Note: The value displayed is a random value used for example reference.
Power Sensitivity
Thissettingisnormallysetto100%,whichenablestheUPStoprotectagainstwaveform
distortionsinitsACinput.Whensuchdistortionoccurs,theUPSwillnormallyswitchtoproviding
puresinewavepowerfromitsbatteryreservesforaslongasthedistortionispresent.Insome
areaswithpoorutilitypowerorwheretheUPS’sinputpowercomesfromabackupgenerator,
frequentbrownoutsand/orchronicwaveformdistortioncouldcausetheUPStoswitchtobattery
toooften,drainingitsbatteryreserves.YoumaybeabletoreducehowoftenyourUPSswitchesto
batteryduetowaveformdistortionorbrownoutsbyexperimentingwithdifferentsettings.Asthe
settingisreduced,theUPSbecomesmoretolerantofvariationsinitsinputpower’sACwaveform.
Note: When experimenting with different settings, operate connected equipment in a safe test mode so that the
effect on the equipment of any waveform distortions in the UPS’s output can be evaluated without disrupting
critical operations. The experiment should last long enough to assure that all expected line conditions are
encountered.
14-03-028-93-3088.indb 14 3/20/2014 4:08:47 PM