ECO Mode is great for your bills and for the planet: using it can save the
average household* £85 and 50 kg of CO
2
e every year!
* based on 4 person household using the 9kW model
Upon connecting ENVi
®
to the electricity supply, there may be a delay period of a
few seconds whilst the controller connects to the Tri-HUB. The Start/Stop
icon on the controller will illuminate once this is complete, touch it to start
showering. The shower temperature will be set to the Default Showering
Temperature; the shower timer will also start counting down from the Default
Showering Time.
Touch the icon whilst
showering (with more than
two minutes remaining
on the timer) to activate
ECO mode, which reduces
the timer by one minute.
The temperature readout
lls green with ECO mode
active. Touch the icon
again to deactivate ECO
mode and restore one
additional minute to the
timer.
7
The temperature readout will ash whilst the water is warming to the target
temperature. The temperature readout also gradually lls blue, indicating how
much of the timer has elapsed, in addition to the on-screen timer readout.
Switching the Shower OnSwitching the Shower On
To Next Page
Loading...
Need help?
General
