Need help?Do you have a question about the Triton Martinique and is the answer not in the manual?
General| Type | Electric Shower |
|---|---|
| Installation | Wall Mounted |
| Start/Stop Button | Yes |
| Material | Plastic |
| Finish | White |
| Shape | Rectangular |
| Water Entry Points | Top, Bottom, Back (Right Hand Side) |
| Cable Entry Points | Top, Bottom, Back (Right Hand Side) |
Crucial electrical safety rules for installation and use.
Requirements for earthing and bonding all exposed metal parts.
Use of MCB/fuse and RCD for circuit protection.
Connecting earth, neutral, and live cables to the terminal block.
Setting the valve spindle and temperature control before powering on.
Aligning and securing the shower unit cover.
Turning on supplies and flushing the unit for initial operation.
Repeating temperature adjustments to expel trapped air.
Connecting the 10-way ribbon cable to the power PCB.
Instructions for initiating and stopping water flow using buttons.
Explanation of HIGH, COLD, and ECONOMY button functions.
How temperature is adjusted by altering water flow rate.
Method to decrease temperature by increasing water flow.
Method to increase temperature by decreasing water flow.
Explains the low pressure indicator and its safety cut-out.
Details the non-resettable thermal cut-out safety device.
Step-by-step guide for safely removing the sprayplate.
Recommended methods for cleaning the sprayplate to remove scale.
Recommended periodic cleaning of the inlet filter for performance.
How to access and properly clean the wire mesh inlet filter.
Steps to diagnose and resolve no water flow problems.
Actions to take if the water becomes too hot.
How to address water temperature cycling issues.
Steps to resolve issues with water being too cool.
Diagnosing electrical malfunctions or safety cut-out operations.
Troubleshooting temperature changes during showering.
Steps to take when the PRD has operated.
Diagnosing water flow issues when the unit is turned off.
Details of the two-year guarantee for domestic use and installation requirements.
To Next Page
