GB
CONTENTS
Thank you for purchasing this Triton tool. Please read these instructions: they contain information necessary for safe and
effective operation of this product. This product has a number of unique features and, even if you are familiar with similar
products, reading the instructions will help you get the full benefit of its unique design. Keep these instructions close to
hand and ensure all users of this tool have read and fully understand them.
Contents / Specifications / Symbols
Specifications 2
Symbols 2
Safety Instructions 3
Parts List 5
Product Images 6
Fitting the Table 9
Assembly 10
Key Factors for Quality of Cut 12
Operation 13
Edge Rebating 13
Trenching 14
Planing 16
Planing to Width 17
Edge Moulding 18
End Grain Work 19
Morticing 19
Warranty 20
SPECIFICATIONS
SYMBOLS
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Always wear ear, eye and respiratory
protection.
WARNING. To reduce the
risk of injury, user must read instruction
manual
Instruction warning.
Part no: RTA300
Table size: 540mm x 690mm
Cuts: Planing, trenching, rebating, moulding, endgrain work,
free-hand work
Net weight: 12.5kg (27.5lb)
Protect your hearing
Always use proper hearing protection when tool noise exceeds 85dB.
To Next Page
Loading...
Need help?
General
