T70Z electric shower
11
W-005-A
WARNING!
Check there are no hidden cables or
pipes before drilling holes for wall
plugs. Use great care when using power
tools near water. The use of a residual
current device (RCD) is recommended.
FITTING THE SHOWER TO THE WALL
Note: The control knobs are an integral part of
the cover – DO NOT attempt to remove them.
Lift the cover from the backplate.
Entry points can be found on page 6.
The water inlet (fig.7) has been designed to
allow left or right fitting.
To make the inlet either left or right fitting:
• Turn the inlet either left or right.
• Insert the retaining screw
Note: The inlet is not fixed during production.
Deviations from the designated entry points
will invalidate product approvals and could
invalidate product warranty.
Fig.7
Water inlet
To Next Page
Loading...
Need help?
General
