T70Z electric shower
21
CLEANING THE FILTER
It is recommended that the lter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by an installer or service engineer.
IMPORTANT: Before servicing, switch off
both the electricity supply and water
supply at the mains.
The inlet lter is situated in the bottom of the
inlet pipe (g.20).
To gain access to the lter, remove the cover and
then unscrew the assembly from the bottom of
the inlet pipe.
When cleaning the lter, do not use a sharp
object as it will cause damage. It is preferable to
use an old toothbrush or similar.
When retting, DO NOT overtighten the lter.
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Fig.20
Filter
assembly
Inlet pipe
To Next Page
Loading...
Need help?
General
