ADVANCED OPERATION GUIDE v
Introduction
Guides included
The following guides are included with this machine. Refer to the guide that
corresponds to your particular objective.
Installation Guide
This Guide contains instructions for assembling and installing the machine.
Operation Guide
This Operation Guide contains explanations on the initial installation and set-up of
this machine, the procedure to connect it to a computer, and the basic procedures
for using this machine as a copier, printer, and scanner as well as for resolving
problems if trouble occurs.
Advanced Operation Guide (This guide)
The Advanced Operation Guide contains explanations on copier, printer, and
scanner functions as well as default settings that can be adjusted on this machine.
This guide is stored on the CD-ROM as a PDF document.
KX Driver User Guide
Describes how to install and set the printer driver. This guide is stored on the CD-
ROM as a PDF document.
Network FAX Driver Operation Guide
Describes how to use the Network FAX Driver to send documents created on a
network computer directly from that computer to the other FAX System. This guide
is stored on the CD-ROM as a PDF document.
Network Tool for Clients Operation Guide
Network Tool for Clients is a network printing utility intended to monitor and configure
the printing system. This guide describes how to install and operate Network Tool for
Clients. This guide is stored on the CD-ROM as a PDF document.
Network Tool for Direct Printing Operation Guide
Network Tool for Direct Printing is a utility that allows you to directly print PDF files
without starting Adobe Acrobat by directly sending a PDF file through the Windows
spooler. This guide describes how to install and operate Network Tool for Direct
Printing. This guide is stored on the CD-ROM as a PDF document.
To Next Page