Using EWS (Embedded Web Server)
ADVANCED OPERATION GUIDE 8-3
Start Page
The following operations are possible from the Start page.
• Verifying the machine’s operating status
• Changing the language that EWS is displayed in
• Verifying various settings (machine, printing, scanning, network and e-mail)
• Verifying the number of scanned pages and the number of prints made on the
machine
• Access linked home pages
All users will have access to the Start page.
To return from any other page to this home page, click on T Start.
Start > Start
This page allows you to verify the machine’s operating status. This will be the first
screen that appears after EWS has been started up.
Item Description
Select Language Appears if EWS pages support multiple languages. Supported languages may
also be selected through language preference settings in your browser.
To change EWS language:
- Open the Select Language drop down list by clicking it.
- Select the appropriate language.
If you attempt to view EWS with a character set other than the language that is
used on the operation panel’s display, some characters may be illegible.
Operation Panel This indicates the machine’s operating status as displayed on the operation
panel. To update the display to the most recent status, click the Refresh button.
Toner Level This shows the approximate level of remaining toner. When the value is 100%,
the toner container is full. The closer to 0%, the smaller the amount of remaining
toner.
General Information This allows you to verify the following information: IP Address, Host Name, MAC
Address, System Firmware, Engine Firmware, Serial Number, and Asset
Number.
Media Input This shows paper size and media type for cassettes and MP tray.
To Next Page