System Settings
5-8 ADVANCED OPERATION GUIDE
Using a Program
1
Press Program. The Program Call screen is displayed.
2
Press S or T to select the program number required and press Enter. The display
shows Called and the Program is loaded.
When the destination of a PC folder is registered, the User Login Name and Login
Password must be input.
3
Position the originals and press Start.
Copy jobs or, send jobs are produced using the settings registered in the program.
If the program is called from a one-touch key, it is necessary to register the one-touch
key - refer to Registering One-Touch Keys on page 5-6.
Restarting the Machine
You must restart the machine after you have changed any network settings.
1 Access Restart.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2 To restart the machine, press left Select.
System Menu/
Counter
S or T
System Setting
Enter
S or T
Restart
Enter
To Next Page