EasyManuals Logo

Triumph Rocket III Handbook

Triumph Rocket III
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
General Information
Clock Adjustment
To set the clock, turn the ignition to the ON
position. Press and release the reset button
until the clock is visible in the display screen.
Press and hold the reset button for
4 seconds. After 4 seconds either 24 Hr or
12 Hr will be shown flashing. Press and
release the reset button to select the desired
clock display. When the correct display is
shown, do not touch the reset button until
the clock is shown with the hour display
flashing.
To reset the hour display, ensure that the
hour display is still flashing. Press the reset
button to change the setting. Each individual
button press will change the setting by one
digit. If the button is held, the display will
continuously scroll through in single digit
increments.
When the correct hour display is shown, do
not touch the reset button for 6 seconds. The
minutes display will begin to flash
automatically. The minutes display is adjusted
in the same way as for the hours.
Once both hours and minutes are correctly
set, do not touch the reset button for
6 seconds and the display will cease to flash
automatically.
1. C l o c k d i s p l a y
2. Hours read-out
3. Minutes read-out
Range to Empty
This is an indication of the predicted distance
that can be travelled on the remaining fuel in
the tank. It is displayed when the ignition
switch is turned to the ON position.
1. Range to empty
Warning
Do not attempt to adjust the clock with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident.
cfzs_2
2
3
1
.
.
cfzs 6
1
.

Table of Contents

Other manuals for Triumph Rocket III

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Rocket III and is the answer not in the manual?

Triumph Rocket III Specifications

General IconGeneral
Compression Ratio10.0:1
Final DriveShaft
Transmission5-speed
Rear BrakesSingle 316mm disc, 2-piston caliper
Front Tire150/80 R17
Rear Tire240/50 R16
Dry Weight320 kg (705 lbs)
Fuel SystemElectronic fuel injection
Exhaust3-into-1 into 2
ClutchWet, multi-plate
FrameTubular steel, twin spine
Rear SuspensionTwin shocks, adjustable preload
Front BrakesTwin 320mm floating discs, 4-piston calipers
Front Wheel17 x 3.5 in
Fuel Tank Capacity24 liters (6.3 US gal)
Engine TypeLiquid-cooled, DOHC, in-line 3-cylinder

Related product manuals