38
How to Ride the Motorcycle
To Stop the Engine
1. Ignition switch
2. Engine stop switch
3. Starter button
Note:
• When using the side stand, always
turn the handlebars fully to the left
and leave the motorcycle in first
gear.
Support the motorcycle on a firm, level
surface with the side stand.
Close the throttle completely.
Select neutral.
Turn the ignition switch off.
If parking:
Lock the steering.
Remove the key.
Engage first gear.
For instructions on safe parking, (see
page 43).
cbmp1
1
2
3
5
4
2
3
ceno
Caution
The engine should normally be stopped by
turning the ignition switch to the OFF
position. The engine stop switch is for
emergency use only. Do not leave the
ignition switched on with the engine
stopped. Electrical damage may result.
To Next Page
Loading...
