87
Maintenance and Adjustment
Direction Indicator Lights
Bulb Replacement
1. Screwdriver
1. Lens
2. Locating tang
3. Bulb
Use a flat bladed screwdriver to carefully
remove the lens from the indicator to gain
access to the bulb for replacement.
To remove the bulb, gently press inwards and
twist anti-clockwise.
Installation for the bulb is the reverse of the
removal procedure.
To install the indicator lens, align the locating
tang with the indicator body and push the
lens until the retaining clips secure the lens.
1
cenk
1
2
3
cenj
Caution
When installing the lens, ensure that the
locating tang is correctly aligned to the
indicator body.
To Next Page
Loading...
