86
Maintenance and Adjustment
Rear Light
Bulb Replacement
1. R e a r l i g h t b u l b
2. Bulb holder
Remove the seat.
Disconnect the battery, negative (black) lead
first.
The rear light bulb holder can be located
underneath the rear mudguard.
Rotate the bulb holder anti-clockwise to
release it from the lamp body.
To remove the bulb from the holder, gently
press inwards and twist anti-clockwise.
Installation for the bulb is the reverse of the
removal procedure.
Warning
The bulb becomes hot during use. Always
allow sufficient time for the bulb to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before re-use.
cepa
1
2
Caution
When reconnecting the battery, connect
the positive (red) lead first.
To Next Page
Loading...
