P. 11
Seat position and angle
The seat position is the primary adjustment
to modify the user’s position.
Moving it back or forth will change the torso
angle and leg extension when pedalling, so
that optimal control and pedalling efficiency
can be obtained.
For a more active position, we recommend
that the seat be adjusted so that the user
has a slightly forward torso angle as well as
an approximate knee angle of 25 degrees
when the pedal is at its farthest point when
pedalling.
For a more relaxed position, the seat can
be moved forward, thus allowing less leg
extension and an upright or reclined torso
angle.
INSIDE LEG: 30” to 40”.
A) Locking set screw
B) Quick release locking lever
C) Seat post
Seat position
Set seat position by moving the Seat Post
(C) forward or backward along the frame.
1.
Loosen the seat post locking set screw
(A) using an Allen key
2. Loosen the quick release locking lever
(B) to release the seat post (C)
3.
Adjust seat position to the desired
distance from the chainwheel
4.
Lock the quick release lever (B) to
secure the seat post (C) in its new
position
5.
Tighten the seat post locking set screw
(A)
To Next Page
Loading...