P. 52 — User manual V3
Adjust the brake pads position
Adjust the position of both brake pads
(outboard and inboard) so they sit as close
as possible to the rotor without rubbing it
when the wheel spins.
If these adjustments did not fix the
braking power issue, do not ride your
Azteca before having it inspected by a
qualified technician!
1.
Turn the adjustment barrel on the brake
lever counterclockwise to move the
outboard brake pad closer to the rotor.
2.
Move the inboard brake pad closer to
the rotor by using the corresponding
tool or knob on the inboard piston
clockwise (first loosen the anti-rotation
set screw if there is one, and make sure
to tighten it again after the adjustment).
To Next Page
Loading...