Trividia TRUE FOCUS - How to Test Control Solution

18 19
1. Gather and check supplies.
See Getting Started -Testing Checklist.
Do not use test strips or control
solution if either Use By Dates (written
or printed) have passed. Discard and
use new products.
2. Allow control solution,
vial of test strips and
meter to adjust to room
temperature.
3. Wash hands.
Dry thoroughly.
4. Gently swirl or
invert control
solution bottle
to mix.
DO NOT SHAKE.
How To Test Control Solution
Control Solution/Solución de Control
Level/Nivel 2 3 ml
U5TVH02 Rev. 40 - U5TVH72
Manufactured for/Fabricado para:
Fort Lauderdale FL 33309 USA
For in vitro diagnostic use only.
Store in a dry place at room temperature between
59-86F (15-30C). DO NOT REFRIGERATE
OR FREEZE.
LOT 8LOA18
EXP
2018-10-31
Control Solution LabelTest Strip Label
LOT - ABC1234
EXP - 2018/10/31
1 - 72-90 mg/dL
2 - 150-200 mg/dL
3 - 301-398 mg/dL
May 30, 2018
Use By Dates
5. Remove one
test strip from
vial. Close vial
immediately.
Use test strip
quickly after
taking it out of
the vial.
6. Insert test strip firmly
into Test Port. Meter
turns on.
Keep test strip in
meter until testing is
finished. Do not add
control solution to test
strip before inserting
into meter.
LB0010
9 JUNE 2009
7. Remove cap from
control solution
bottle. Gently
squeeze a drop
onto a clean tissue.
Wipe off bottle tip
and discard tissue.
Gently squeeze a
drop onto a small
piece of unused
aluminum foil,
clear plastic wrap,
or waxed paper for
testing.
(Examples only and do not represent
actual Control Test ranges)
May 30, 2018
Tfocus_OB_GutsENG_UE4TVH03r43.indd 18-19 4/19/18 07:42