STEP 4: HANDLEBAR INSTALLATION
Insert the Hand Pulse Sensor Wires (41) into the
hole of the Handlebar Post (3) and then pull them
out from the top of the Handlebar Post (3).
Attach Handlebar (2) onto Handlebar Post (3) with
one Bushing (73) and one Handlebar Decorative
Cover (72). Lock the Handlebar Post (3) in place
by tightening Handlebar Adjustable Knob (74) in a
clockwise direction.
STEP 4
2
1
3
ASSEMBLY STEPS
To Next Page
Loading...
