12
ASSEMBLY STEPS
STEP 2:
Attach the Front Plastic Cover (19) to the Support
Tube (12). Connect the Wire (20 & 22) and Tension
Line (21) .
Install the Support Tube (12) into the Main Frame
(40) using Bolt (M8 x 16) (11), and the Arc washer
(D8) (17).
Attach the Tension Knob (15) to the Support Tube
(12) using the Arc Washer (D6) (14) and the Cross
Head Screws (M5) (13).
STEP 2
#20M03T008 OMEGA 390 STATIONARY BIKE USER MANUAL.indd 12 2020/03/25 3:59 PM
To Next Page
Loading...
