11
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
•
Use the supplied parts and hardware for the assembly.
•
Before assembling please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1:
Attach the Front Stabiliser (23) and Rear Stabiliser (26) to the Main Frame (40) with Carriage Bolt (M8 x 70)
(16), Domed Nut (M8) (25) and Arc Washer (D8) (17).
Attach the pedal to the crank arms. Install pedals (28L / 28R) to the crank. Do this by locking the Left Pedal
(28L) tightly in a counterclockwise direction. Then lock the Right Pedal (28R) tightly in a clockwise direction.
STEP 1
#20M03T008 OMEGA 390 STATIONARY BIKE USER MANUAL.indd 11 2020/03/25 3:59 PM
To Next Page
Loading...
