FUNCTIONS AND OPERATIONS
Mode or function Action
Auto on/off &
Auto Start/Stop
As long as the machine is in motion, the meter is in action. If there is no movement for 3 seconds,
the meter will be turned off automatically.
Auto Scan
Press the MODE button until the ARROW points to SCAN, the meter will rotate
through all 4 scanable functions --Speed, Distance, Time and Calorie. Each display will be held for 5
seconds. The RESET button will be inactive during this process.
Current Speed
Press the MODE button until the ARROW points to SPEED (the ARROW pointing to
SCAN is not displayed on the LCD), the current speed is displayed continuously.
Tr ip Distance
While pressing the MODE button until the ARROW points to DIST (the ARROW pointing to
SCAN is not displayed on the LCD), the trip distance is displayed continuously. Pressing the RESET
button will reset the function value to zero.
Elapsed Time
Press the MODE button until the ARROW points to TIME (the ARROW pointing to
SCAN is not displayed on the LCD), the elapsed time is displayed continuously. Pressing the RESET
button will reset the function value to zero.
Calories
Press the MODE button until the ARROW points to CAL (the ARROW pointing to
SCAN is not displayed on the LCD), the calorie consumption is displayed continuously. Pressing the
RESET button will reset the function value to zero.
Reset Pressing the MODE button for more than 3 seconds will reset all function values to zero.
To Next Page
Loading...
Need help?
General
