13. PARTS LIST
NO. DESCRIPTION O’TY NO.DESCRIPTIONO’TY
1 Main Frame 124Frame Base Cap (R) 1
2Frame Base 125Top Motor Cover1
3 Incline Bracket 126Rear Adjustment Base (L)1
4 Right Handrail 127Rear Adjustment Base (R)1
5 Left Handrail 128Handpulse Assembly 2
6 Console Support128~1 Handpulse Assembly (Top) 2
7 Outer Slide 1 28~2 Handpulse Assembly (Bottom) 2
8 Inner Slide 1 28~3 Handpulse Wire (500m/m) 1
9 Locking Knob Axle 129Handpulse End Cap2
10 Incline Motor 130 Motor Cover Anchor 5
11 Drive Belt 131 Button Head End Cap (ø38) 2
13 Motor Bracket 132Frame Base End Cap 2
14 Running Belt (450 x 2720 x 1.6T) 133 Front Tr ansportation Wheel (ø60 x 35L)2
15 Running Deck (620 x 1190 x 18T) 134Rear Tr ansportation Wheel (ø75 x 22L)2
16 Front Roller w/ Pulley 135Leveling Foot (ø30 x 35L)6
16~3 Magnet 136 Foot Pad (ø37 x 13T x 3/8”) 2
17 Rear Roller (ø60 x 460L) 137 Foot Rail (1170m/m) 2
19 Front Wheel Sleeve (ø10 x ø14 x 35.5L) 238 Non-Slip Rubber (L) (71×503m/m) 1
20 Rear Wheel Sleeve (ø10 x ø14 x 22.5L) 239 Non-Slip Rubber (R) (71×503m/m) 1
21 Console 140Handgrip Foam (ø38 x 3T x 225L) 2
21~1 Top Console Cover141 Square End Cap (□21.4 x 21.4) 1
21~2 Bottom Console Cover142 Square End Cap (□25.4 x 25.4) 1
21~3 Fan Deflector Fan Grill 143Square End Cap (□20 x 40) 2
21~5 Fan Grill Anchor 244Trapezoidal Safety Key (800m/m) 1
21~7 Safety Switch Module w/ Cable (300m/m) 145Electronic Module 1
21~8 Fan 146Speed Adjustment Switch w/Cable1
21~9 Fan Power Switch 147Incline Adjustment Switch w/Cable 1
21~11 Sheet Metal Screw (3 x 10m/m) 248Power Cord 1
21~12 Sheet Metal Screw (3.5 x 32m/m) 449 Connecting Wires (Black) (10cm x 764 x 775) 1
21~13 Receiver, HR Assembly 150 Connecting Wires (White) (10cm x 764 x 775) 1
22 Handgrip Cap 251 Connecting Wires (Black) (20cm x 764 x 764) 1
23 Frame Base Cap (L) 152 Controller 1
10107M-18
To Next Page
Loading...
