60
47
46
59
55
54
104
104
107
85
107
117
Step 04
• Connect the Middle Computer Cable (54) and the Upper
Computer Cable (55).
• Connect the Speed Adjustment Switch Cable (46) with the
Upper Speed Cable (59).
• Connect the Incline Adjustment Switch Cable (47) with the
Incline Cable (60).
Step 05
• Insert the Consol Support (6) into the Left and Right Handrails
(4, 5).
• Secure the Consol Support (6) and the Left and Right Handrail
(4,5) with the four 5/16" x 1/2" Button Head Socket Bolts (104),
using the Combination M5 Allen Wrench & Phillips Head Screw
Driver (107) to tighten and secure.
Step 06
• Install the Book Rack (117) on the Consol Support (6) and
secure with three M5 x 15mm Phillips Head Screws (85), using
the Combination M5 Allen Wrench & Phillips Head Screw Drive
(107).
CAUTION:
Ensure that cables are not damaged during
assembly or when tightening screws.
CAUTION:
Ensure that cables are not damaged during
assembly or when tightening screws.
Recheck
all bolts and nuts are
tightened securely
before using the machine
5
6
4
6
To Next Page
Loading...
