19
DISTANCE: Press MODE button until “▼” appears on DISTANCE. At this setting the
distance travelled from the beginning of the exercise will be displayed.
CALORIE: Press MODE button until “▼” appears on CAL. At this setting the total
calories burnt from the start of the exercise wn:h be displayed.
TOTAL DIST (ODO): Press MODE button until “▼” appears on ODO. At this setting the total
distance travelled after the batteries were installed will be displayed
PULSE: Press MODE button until “▼” appears at PULSE. At this setting the console
will display your current heart beat rate in beats per minute (BPM) on the
LCD after 3-4 seconds. Before measuring your pulse rate, please place both
your palms on the contact pads. Ensure that your hands are moist to make
the correct contact with the sensors
NOTE: The measurement value cannot be regarded for medical treatment and
should be used as a guide.
CONSOLE FUNCTIONS
To Next Page
Loading...
