Trojan SUMMIT 280 - Maintenance; Troubleshooting

25
MAINTENANCE
CLEANING
The Trojan Summit 280 Elliptical Trainer can be cleaned with a soft cloth and mild detergent. Do not
use abrasives or solvents on plastic parts. Please wipe your perspiration off the Trojan Summit 280
Elliptical Trainer after each use.
Please inspect all assembly bolts and pedals on the machine for proper tightness before use.
STORAGE
Store the Trojan Summit 280 Elliptical Trainer in a clean and dry environment away from children.
PROBLEM SOLUTION
There is no display on the
Console.
1. Remove the Console and verify the wire that comes from the
Console is properly connected to the wire that comes from the
Main Frame.
2. Check if the batteries are correctly positioned and that the
battery springs are in proper contact with batteries.
3. The batteries in the Console may be dead. Change to new bat-
teries.
Squeaking noise when in use. There may be a loose bolt, please inspect the bolts and tighten if
necessary.
TROUBLESHOOTING